Axalta primers deliver the level, texture-free surface needed to produce a world class finish. Our primers are durable, easy to apply and most importantly, easy to sand.
- High performance
- Superior corrosion protection
- Chrome free
- Excellent topcoat holdout
DP8130 Alu Grip Primer
- Thin film 2-component chromate-free epoxy Imron® Marine Alu Grip Primer.
- Color: white.
- Composition based on epoxy resin.
Properties
- Very good corrosion and chemical resistance.
- Excellent adhesion on properly treated aluminum, aluminum alloys and bronze.
- Recommended as a first coat over new aluminum constructions.
- High humidity resistance and very good flexibility.
- Recommended as a primer for all Imron® Marine systems
Substrates
Following specifications listed in the Imron® Marine Manual and in particular: Aluminum, aluminum alloys, lead and bronze.
- bare metals: steel, aluminum and galvanized steel;
- well prepared Gelcoat, well sanded fairing and cured repaired finishes.
| VOC | 499 to 533 g/l |
| Number of coats | 1 to 2 |
| DFT | 25 to 35 μ |
DP8140 Universal Primer
- 2-component chromate-free epoxy Imron® Marine Universal Primer.
- Ideal primer for the use on above and below the water area of yacht and pleasure crafts.
- Colour: grey.
- Composition based on epoxy resin.
Properties
- Very good corrosion and chemical resistance.
- Excellent adhesion on properly treated metal substrates
- Excellent prevention primer against Gelcoat osmosis and blistering.
- Recommended as a first coat over new steel constructions.
- Very good filling properties. Suitable for use over rough substrates e.g. grit blasted metals.
- High humidity resistance and very good flexibility.
- Recommended as a primer for all Imron® Marine systems.
Substrates
Following specifications listed in the Imron® Marine Manual and in particular:
- bare metals: steel, aluminium and galvanised steel;
- well prepared Gelcoat, cured and sanded fairing and cured repaired finishes
| VOC | 476 to 511 g/l |
| Number of coats | 2 to 4 |
| DFT | 80 to 225 μ |
DP4101/DP4104 HS Primer
- 2-component High Solids primer with 2 methods of application:
- Primer surfacer.
- High density primer surfacer.
- Colour: DP4101 white, DP4104 medium grey.
- Composition based on a special hydroxy functional acrylic
Properties
- Very high solids – low VOC technology: better filling, same build with fewer coats, resulting in less consumption.
- Less solvent than conventional 2K high solids primers.
- Excellent in dry and wet sanding.
- Superior topcoat hold-out.
- Can be coated with all Imron® Marine topcoats
Substrates
Following specifications listed in the Imron® Marine Manual and in particular:
- cured repaired finishes;
- cured Imron® Marine epoxy primers.
| VOC | 455 – 480 g/l |
| Number of coats | 1-3 Primer surfacer / High Density 1-5 |
| DFT | 60 to 80 μ/coat |
Clear Carbon Fibre Sealer
- Clear Carbon Fibre Sealer – to podkład poliuretanowy przeznaczony do wypełniania porowatości we wszystkich gatunkach włókien węglowych, co skutkuje mniejszą liczbą etapów procesu i mniejszym zużyciem materiału w porównaniu do procesów wykorzystujących wyłącznie lakier bezbarwny.
- Aby uzyskać maksymalną ochronę przed promieniowaniem UV, konieczne jest nałożenie zalecanego lakieru bezbarwnego na ten podkład
- Ma doskonałą rozpływność, jest łatwy w aplikacji i szybko schnie.
Substrates
- Carbon fibre
| VOC | 460 g/l |
| Number of coats | 2 (5-10 mins flash between) |
| DFT | 40-60 μm |